Regarding the current headaches of computer rooms, construction site wiring and messy home lines sorting, Cable, that is, cable marking can be said to be crucial and indispensable. If the marking is not done well, when the lines are as messy as a lump, it will take a lot of time to check for such a small problem, which can really make people desperate! Therefore, mastering Cable best becomes particularly critical and imminent. So, what exactly is Cable best? To put it simply, when marking those colorful cables, we must follow a series of methods and principles that have been proven to be easy to use, effective, and can improve efficiency. It does not mean that you can just use a pen and draw it on the cable for a few seconds.
Provide global procurement services for weak current intelligent products!
How can I make cable marks? It is not complicated to say it is not complicated, nor is it simple to say it is not simple to say it is mainly divided into several key and separate steps to operate and implement it step by step:
1. The marking content should be clear and complete : you can't just write one or two letters or numbers so that you can finish it. It's best to indicate where the wire comes from and where it is to go. These most basic information are used; for example, "Living Room TV-Router Port 1" so that people can see it clearly and not be confused.
2. Choose the right marking material : There are so many marking materials on the market, such as heat shrink tubes, label paper, labeling sticks, etc., you have to choose according to the environment in which the cable is located; if it is in a hot and humid place, the ordinary paper label will definitely not work, and it will break suddenly. You have to choose a special material that is resistant to high temperatures and who can last longer.
3. The position must be fixed and unified : do not stick the wire head on this line, and stick it on the middle of the line in other cables, which will make people dazzled and confused; it is best to uniformly stipulate that labels are about 5 to 10 cm away from the connector or connector, so that searching can be fast and convenient.
4. Adopt standardized naming methods : it is not possible to name randomly by yourself. It is best to set a set of standardized naming rules with the team or company, such as combining naming according to the region, device type, port serial number, etc. You cannot use this rule today, and change another rule tomorrow, which will be messed up. If not, it will be possible.
5. The marking must be firm and wear-resistant : the label that has been pasted cannot fall off with a light touch with your hands, otherwise the label will disappear in a few days, which is equivalent to vain. It is best to choose a label material with particularly strong viscosity and slightly prevent scratches and wear on the surface.
When actually using these methods to mark cables, you will definitely encounter various strange and specific questions and situations. Someone asked, can you mark cables online by handwriting? Theoretically, it is OK, but it is really not recommended or recommended. This is not recommended. Because handwritten characters are sometimes written a little sloppy and cannot be seen clearly. Moreover, over time, the handwriting on them is easily blurred and difficult to identify. It is far less reliable and stable than the labels printed with professional label printing equipment. Some people also asked whether the larger the words on the label, the clearer the better? In fact, this is not the case. If the characters are too big, the label will be very long. It may not be stuck on the cable, or it may appear particularly difficult and messy. If the characters are too small and cannot be seen clearly, it is not possible. Therefore, the size of the characters should be adjusted reasonably according to the thickness of the cable to ensure that they can be seen clearly… In addition, there is another point that needs to be paid attention to, that is, after marking, it is best to back up and make up for it. If the tag is accidentally damaged or dropped, there is still a basis for re-made and compensated.
When choosing a tool like a label printer and a label software, you have to compare and carefully select it carefully: some printers are small in size and easy to carry, suitable for home or small-scale wiring; some printers are more suitable for industrial occasions, and can be used at a time, and the speed is quite fast; while some software functions are very fancy and can be combined with CAD drawings, which may be more suitable and convenient for large and complex wiring projects.
In general, as long as you follow the Cable best step by step as mentioned above, the line management work will be much smoother, saving a lot of time and energy to do other things; don’t think it’s troublesome or waste time to mark it. When there is a problem with the line in the future, you will know how indispensable and helpful it is to mark it in advance!
Leave a Reply