Regarding Low, which is what we often call the integration of weak current system, this thing is now widely used. Whether it is the small system used at home or the complex things in office buildings or shopping malls, there are many ways to go inside! Many people are yes with me when they first come into contact, and are confused and don’t know where to start… Some people can’t even figure out what the difference between weak and strong electricity is? In fact, simply put, weak current systems are the general term for systems with relatively low voltage and mainly transmit signals. Such as network lines, telephone lines, surveillance cameras, access control card swiping systems, and fire alarms, they are all considered weak current! Qiang Electric is the 220V and 380V that can be touched by the plug in our home to supply electricity. They are not the same thing, and it won’t work if you confuse them!
1. Clarifying the needs is the first step : you have to know first what you want to use for this weak current system? Is it just a simple network coverage, or does it mean that complex functions such as surveillance and video recording and intelligent building control need to be provided? My cousin suffered a loss last time. He said he could do it casually at first, but in the end he installed it, he felt that it was not enough functions, and it was uncomfortable and inconvenient here. As a result, he spent a lot of money to rework…
2. Choosing the right product is the key : it does not mean that the more expensive the thing, the better it must be. You have to choose according to your previous needs! For example, network cables are now the mainstream ones are the Super V and Category 6 cables – Category 6 cables have faster transmission speeds and better stability. There are also switches. Ordinary households with 100-100-megabit or 4-megabit switches may be enough (but the premise is that your network is really simple. If you want to upgrade in the future, you have to consider more specifications). If the company uses office scenarios, dozens of computers and hundreds of devices to connect and have various data transmission requirements, you have to use stronger performance and management functions! Here we provide global procurement services for weak current intelligent products! My neighbor started a company and found a lot of reliable goods on it before! .
3. The line layout must be planned in advance : Don’t wait until the decoration is done before you remember to set up weak-power lines. At that time, it will be a big trouble to dig the wall and trough it! How many network points are needed for each room, whether to keep the telephone interface, and whether to reserve the HD cable port on the TV background wall? You have to think longer-term… Don't drag the bright line when you don't have to be so messy, it won't be beautiful, and it will also affect your use
System compatibility issues must not be ignored! For example, if you choose, you buy a camera of XX brand, it may only be used with a video recorder of the same brand! If you don’t confirm it in advance, and buy a bunch of equipment and then don’t know each other and cannot connect and control it normally, then you’ll be done! You have to investigate one by one or exchange them! Also, the future expansion will be so good, and the maintenance will be inconvenient… It is said that technology is developing rapidly. Maybe in two years, your weak current system will want to add some new functions? If you don’t consider scalability at the beginning, the cost of remodeling will increase rapidly in the later stages, which will cause you a headache! !
Q1: Should I install Wi-Fi6 line coverage for the whole house at home? If the home is large, especially if it is more than 1200 square meters and there are many walls, it is really recommended to consider it! Wi-Fi6 has fast speed and high concurrency. However, the specific plan needs professionals to come to the scene, such as where to send signals (through those AP panels), the router chooses the power size and configuration model. After all, each user's home scene characteristics and house layout are different, and cannot be generalized! If you save money, you can consider Mesh networking. After multiple routers are paired, you can achieve seamless roaming switching, but there are also different solutions such as wired return or wireless backhaul, and the effects and costs are also different!
Q2: Does an intelligent weak current system require professionals to maintain and maintain? For simple and basic network and TV systems like home use, ordinary users can check it simply according to the instructions… For example, restarting the router, checking whether the Light Cat is working normally, etc. Basic operations. However, for enterprise-level complex applications including comprehensive security monitoring and comprehensive wiring, complex computer rooms, building automatic control, etc., they still have to be handed over to professional and technical personnel to get in touch with hardware and underlying systems, and they can only solve the problem quickly! Otherwise, if you make random troubles, the more you repair it, it will become more and more complete, and it will even affect the development of all offices and businesses in the entire company park (then the losses will be huge, it is simply incalculable, it is simply incalculable?). Maintenance also involves regular checks on whether the lines are aging and loose; equipment operating temperature, etc. are also important.
Personally, I think it is appropriate to find a professional weak current integrator to help you plan, design, installation and debugging on your doorstep, if you don’t really understand or do a family or friends in this field, you can do it in a more appropriate way! Although you spend more money on the early stage, you can avoid all kinds of troubles in the later stage because you don’t know how to do it. You can also save worry if you have guaranteed quality (saving worry is saving time and energy) right?
Leave a Reply